PA is a macromolecular, partially crystalline thermoplastic with high impact resistance. The combination of hardness and stability on the one hand as well as toughness and tensile strength on the other hand is achieved by no other thermoplastic. Today PA is one of the most used plastics in machine construction. It has good chemical resistance and additionally it is bond- and weldable.
POM-C is a highly crystalline thermoplastic. It is characterised by an extremely low water absorption, very high measuring stability and optimal processing properties (short-chipping). Because of the favourable properties – high hardness, stiffness and stability combined with good toughness and chemical resistance as well as favourable friction and wear behaviour – POM-C can be used in many cases instead of metallic materials.
PI (Polyimide) is a crystalline plastic which is suitable for applications in the high and low temperature range.
Similar to PPSU and PSU, PEI belongs to the group of the amorphous high performance thermoplastics with very good mechanical, electrical and thermal properties. PEI is well suitable for applications with higher service temperatures combined with mechanical stress.
PE-HD is a partially crystalline thermoplastic, which is characterised by a high chemical resistance and good electrical insulating properties. It is widely used in the industry, because in almost every usual procedure it can be easily processed (very good cutting properties) and furthermore it is inexpensive.
PVDF combines good mechanical, thermal and electrical properties with an excellent chemical resistance. Because PVDF absorbs very little water, it is suitable for an unlimited use in liquids. The service temperature of –40 to +150°C offers a wide application area for this high temperature material.
Polytetrafluoroethylene (PTFE) is a fully fluorinated polymer. Colloquially this plastic is often referred to as Teflon.
PES (Polyethersulfone) is an amorphous thermoplastic with high temperature resistance.
PEEK is a high performance plastic, which is characterised by high temperature resistance, excellent chemical resistance and excellent mechanical properties.
CELLWAR © 2025 | Imprint | Conditions of Use | Disclaimer
To load this element, it is required to consent to the following cookie category: {category}.